Use this product for renewable solar, off-grid home and business back up power, mobile and emergency backup power applications anywhere that uses 110/120 OR 220/230/240 volts of alternating current. The inverter accepts 24 volts DC, which makes it great for vehicle upfitting as well as boat and RV applications that use a 24 volt battery system. The inverter outputs 120/240 volts AC. The marine-coated or conformal-coated boards also make this inverter great for mobile applications, as it protects the product from dust or water vapor that may be present in the air. A low frequency label has been given to this inverter because of the lowered level of total harmonic distortion (THD) produced during the DC to AC inversion process. This allows for a cleaner transfer of energy, which increases efficiency, and it also provides a quieter performance. This inverter will also run powerful tools like most electric chainsaws, portable grinders, shop vacs, and more. This 6000 watt inverter charger produces a pure sine wave, which some appliances require for use. It can run laser jet printers, computers, televisions, CPAP machines and other medical equipment. During a big storm that knocks out electricity, a battery-bank and power inverter running a sump pump could be the difference that saves a home from flooding. The power to run a heater could save someone thousands of dollars by keeping plumbing pipes from freezing. Also great for emergency backup power applications is the automatic transfer switch on this unit, which keeps the power supply uninterrupted in the event of an outage. With the inverter hooked up to shore power, it will detect the loss of electricity and start pulling energy from a connected battery bank instead to keep the power supply constant. 6000 watt low frequency inverter 110/220VAC Split Phase 18000 watt surge for 20 seconds -3x surge capability Battery Priority Selector Terminal Block GFCI Marine Coated and Protected Multi Stage Smart charger 85 Amp Remote panel available Auto frequency 10msec typical transfer time Selectable 25W power save mode (hibernation) 8 battery charger settings Specifications Inverter Output Specifications: Continuous Output Power: 6000 Watts Surge Rating: 18000 Watts (20 Seconds) Output Waveform: Pure Sine/Same as input (Bypass Mode) Nominal Efficiency: >88% (Peak) Line Mode Efficiency: >95% Output Frequency: 50Hz +/- 0.3Hz / 60Hz +/- 0.3Hz Typical Transfer Time: 10ms (Max) THD: < 10% DC Input Specifications Nominal Input Voltage: 24.0VDC Low Battery Alarm: 21.0VDC-22.0VDC Low battery Trip: 20.0VDC-21.0VDC High Voltage Alarm: 32.0VDC Low battery Voltage Restart: 26.6Vdc Idle Consumption: 76.8 Watts Idle Consumption in Power Saver Mode: 29 Watts Charger Specifications Output voltage: Depends on battery Type Charger Rate: 85A Dimensions Unit Weight: 79 lbs. Unit Size LxWxH: 23.5x8.5x7.0 inches Shipping Weight: 84 lbs. Shipping LxWxH 30.5x14.5x13.75 inches
Related products
Uncategorized
Uncategorized
